germanybrilliant.com - Causes Of Rusty Bathroom Equipment And How To Overcome Them | Various problems with bathroom equipment may be difficult to avoid. The reason is, that happens because bathroom equipment is used quite often by family members with various habits. For this reason, bathroom equipment needs to be well-maintained and cleaned regularly.
Even though it is done routinely, problems still arise. One of them is rust. Yes, rust is a stain that is often found on several bathroom fixtures. Not only does it reduce aesthetics, but rust can cause bathroom equipment to not function optimally and become damaged.
These brownish-yellow stains can appear in between bathroom equipment, such as water taps, showers, soap and shampoo dispensers, and even on some surfaces of bathroom equipment made of stainless steel.
The following are some of the causes of rust on bathroom equipment.
Rust can form due to the reaction between oxygen and water. This reaction occurs when water vapor comes into contact with metal. If the water used in your building contains a lot of iron, the metal will corrode easily and cause rust stains.
Apart from iron, hard water also has the potential to cause rust. Hard water is water that contains lots of minerals, such as calcium, magnesium, and iron. When water evaporates, mineral deposits can stick to the inside of the item and develop into rust stains.
Puddle of water in the sink. (Doc/GB Sanitaryware)
As time goes by, the quality and material components used in bathroom equipment will decline so that rust can develop, especially on stainless steel materials. Apart from constantly being splashed with water, this can be caused by using mixed materials, such as babet.
If you don't carry out routine maintenance, rust on bathroom fixtures can develop over time. For example, leaving limescale on the water faucet and shower for too long, and rarely brushing the toilet.
An effective way to prevent rust on bathroom accessories is to use quality basic materials, such as brass, SUS 304 stainless steel, or ABS. Both materials are proven to be rust and corrosion-resistant so they can be used for a long time. Avoid using accessories that use babet as the base material because it will corrode more easily.
GB Sanitaryware towel bar GBY5004-CW. (Doc/GB Sanitaryware)
Apart from quality materials, you need to clean and dry bathroom accessories regularly. If the bathroom accessories are made from brass or stainless steel, clean them with a special chrome cleaner. Use a soft cloth and rub in one direction so as not to leave scratches or scratches. Meanwhile, if the base material is ABS, just use a soft cloth and liquid soap to clean it. Then, rinse and dry until there are no more soap or cleaning fluid residues attached.
After cleaning and drying, don't forget to check the bolts on the bathroom accessories, especially if they are hung on the bathroom wall. Make sure the bolts are not rusty. If something is loose, immediately tighten it and replace the rusted bolt with a new bolt. For more information, click the following link.
Hopefully, the information helps, yes! Next, what shall we discuss?
Written by : Nathasya Elvira
