Install The GB Sanitaryware Urinoir Yourself, How To Do It?
05 June 2024
germanybrilliant.com - Install The GB Sanitaryware Urinoir Yourself, How To Do It? | Urinal are modern bathroom equipment that are often found in public facilities, such as hospitals, rest areas, schools, offices, restaurants and shopping centers. However, as education about urinals develops, this sanitary equipment for men is often used in residential building bathrooms.
If more than one urinal is used, usually one urinal and another need to be separated by a partition or partition. To use a urinal in a residential building, in a house for example, you need to pay attention to the size of the bathroom. Why? Because the size of the urinal is generally quite large compared to the toilet. The distance between the floor and the urinal must be right for the comfort of the family members who use it.
GB Sanitaryware Urinal in Bathroom. (Doc/GB Sanitaryware)
Before installing a urinal, initial planning is essential. Starting from choosing the right location according to the bathroom layout and the size of the urinal required.
One GB Sanitaryware urinal package is equipped with:
The urinal tap is made of brass and plated with chrome, and is complete with a rubber seal
Installation equipment
Connection pipes with special rubber seals and rubber gaskets for water drainage pipes
Urinal tap for flushing
Installing a urinal is actually quite easy. You just need to follow the guidebook provided and do it carefully and thoroughly. However, to make installation easier for you, here are the steps to install your own urinal in the bathroom.
Before installing a urinal, the first thing you need to do is turn off the water supply
The next step is to measure the distance from the drain hole to the bolt hole, as well as from the drain hole to the urinal support
After measuring, mark and make holes in the wall using a drill
Prepare the drain pipe, then make sure the rubber seal is installed and not damaged
Use a rubber gasket and let it stick to the urinal body
Then, install the urinal support using a drill
After that, install the urinal body and make sure the drain hole and drain pipe are installed properly and precisely, then lock the bolts at the bottom of the urinal body
Next, install the rinse tap. Separate the bolt and bolt head by turning, then place the rinse tap bolt in the top hole of the urinal body. Then, install the rinse faucet head and tighten it. If using a sensor faucet, make sure there is electricity in the bathroom or a suitable battery
Then, prepare the urinal tap and attach it to the water pipe
Install a rubber seal in the hole at the top of the urinal body to drain water into the urinal faucet pipe. You can cut the pipe to adjust the distance between the faucet and the urinal body
The urinal is ready to use
Good luck! If you are unsure about installation, contact a technician via customer care service to help you.
