INSTALL YOUR OWN SMART CLOSET, IS IT POSSIBLE? CHECK HERE!
20 July 2023
Smart closets are a form of technology implementation in the world of sanitation. Usually, this smart toilet is used in bathrooms in homes that carry a modern lifestyle.
Apart from being more practical, smart closets also have several excellent features compared to conventional toilet seats. For example, the seat cover can be removed, the automatic flush system, and the temperature setting on the seat.
Basically, installing a smart toilet is not as difficult as one might imagine. In fact, some are already equipped with installation instructions in the packaging.
However, before the installation stage, make preparations first. Some of them are:
Make sure none of the drains are clogged and all the equipment needed is prepared.
Because smart toilets require electrical power to operate, be sure to install a 1300 watt socket near the toilet.
Prepare a faucet stop as a way for water to flow into the toilet and place it next to the bottom of the toilet so that it is easy to reach.
Prepare the tools and equipment needed for installation, such as a wrench, seal tape, sealant glue, and others as needed.
How to Install a Smart Toilet
Make a drain hole at the bottom. Make sure the hole is 30 cm from the wall to the AS hole.
Install the rubber gasket into the hole. Make sure the gasket is tight to prevent leakage.
You can also use sealant glue on the bottom of the toilet body. This glue serves to attach the toilet to the floor so as to prevent leaks.
Fit the toilet body into the hole. Make sure it fits snugly in the hole and isn't tilted.
Then, the flexible hose market at the stop faucet. Then, tighten it using a wrench so it doesn't come off easily and leak.
Plug the power cord into the wall socket. Check every part of the toilet body for the location of the flush, rinse, and temperature settings if applicable.
