Water taps or faucets are among the sanitary equipment that must be present in a building. The water tap functions to open and close the flow of water so that it is not wasted. That is why water taps are an important component in buildings.
Because it is frequently used, it is not surprising that the water tap often experiences various problems. One of the most common things is water tap leaks. If it is not addressed immediately, water will continue to flow and inundate the area, and your water bill can even increase. Therefore, it is important to be careful and thorough in choosing or determining the right water tap so that it functions well and lasts a long time.
Apart from leaks, there are several other problems that may occur with the water faucet. The following is the explanation.
1. The faucet valve is not closed properly
Usually, this case is characterized by water droplets continuously coming out of the tap even though the tap valve is in the closed position. This is because the water tap valve is not closed properly.
On old water taps, this problem usually occurs because the strength of the tap valve has decreased so it cannot close completely. If this happens to a new water tap, it may be because the quality of the tap is not good, or the water quality is dirty and contains a lot of sand, which can cause leaks.
Illustration of a water tap valve not functioning optimally. (Doc/GB Sanitaryware)
2. The tap lever is stuck
Apart from the valve not closing properly, poor quality water taps can cause dirt or rust. This can cause the tap lever to drag or jam. On the other hand, water quality that contains lots of minerals, chlorine or mud can also cause deposits on the lever.
When the water tap lever is stuck, we usually turn the lever forcefully or hard. This condition actually makes the damage to the tap worse, it can even break.
3. The water pressure is too strong
Illustration of heavy water pressure. (Doc/GB Sanitaryware)
Leaks and damage to water taps can be caused by water pressure being too strong. This makes the water tap unable to withstand high enough pressure, causing damage and leaks.
To avoid the problems above, choose a water tap that uses quality and tested basic materials. GB Sanitaryware water taps can be the best choice because they are made of brass and stainless steel.
In addition, GB Sanitaryware water taps are equipped with a guarantee so that if there are technical problems you can directly contact customer care via customer service. GB Sanitaryware also provides spare parts for replacement to make it easier and more comfortable for you when damage occurs.
For further information, visit the website www.germanybrilliant.com and Instagram @gbsanitary1. You can also choose GB Sanitaryware products through the nearest building store or your trusted marketplace!
Written by : Nathasya Elvira
