Squatting and sitting toilets are the types of toilets commonly used in Indonesia. Both have their respective advantages and disadvantages. However, the type of toilet that is most often used is the sitting toilet, especially in modern bathrooms.
The advantages of using a sitting toilet are varied. Starting from making the bathroom look more modern and contemporary, easy to clean, and saving money on paying professional services for installation. Yes, when compared to a squat toilet, a sitting toilet is easier to install. In fact, you can do it yourself at home, you know!
However, there is a possibility that the toilet seat that was installed by yourself was not installed correctly. Moreover, if you have no experience and sewerage. There are several problems that may arise if the toilet is installed incorrectly, such as leaks, odors and blockages.
But, you don't have to worry. On the toilet packaging there is usually a manual book or installation instructions book. If followed carefully and correctly, the results will be correct.
One of the GB Sanitaryware toilets that you can choose is the GBC-TW005. This sitting toilet, which is wrapped in a minimalist and modern design, can withstand loads of up to 400 kg and is SNI certified.
Installing the GBC-TW005 toilet is not too difficult, you just need to be careful in the installation process. Purchasing a set of GBC-TW005 toilet packaging is also equipped with:
If you want to replace an old toilet, the first thing you have to do is turn off the water flow via the tap stop and remove the flexible hose
Clean the rubber seal at the bottom so the toilet can be removed. Use a knife or cutter to clean it
Make sure the distance from the wall to the drain pipe hole on the floor is 50 cm (US distance)
Then, drill a hole in the floor to install the bracket using a drill and place the gasket in the water pipe hole. Then, install the toilet body
Prepare the flush and unlock button at the bottom, then install it on the tank. Don't forget to relock the flush button on the water tank so it doesn't shake
Install the tank gasket, then install it on the toilet body
Lock the water tank on the left and right using the scrub provided
Prepare the tank float, then open the lock at the bottom. Install it on the tank and lock it back
Prepare the flexible hose that is available and make sure there is a rubber seal on the flexible
Attach the end of the flexible hose to the water tank and the other end to the tap stop
Prepare the flush button and attach it to the tank lid and lock it again. At this stage, you can adjust the scrub on the flush button so you can press deeper
Next is to install the toilet lid. You have to unscrew the bolts and rubber provided. Then, install the rubber on the toilet body and make sure the toilet lid slot is straight, then install the bolts provided.
Install the toilet lid
Don't forget to use seal glue on the bottom of the toilet body so that the toilet doesn't shake when used and prevents water seepage.
Those are the steps to install the GB Sanitaryware GBC-TW005 toilet. For further guidance, please see the following video!
Hopefully the information is useful, yes! Good luck.
