TIPS FOR CHOOSING A QUALITY AND MULTIFUNCTIONAL SENSOR FAUCET
15 March 2024
The water tap is one of the most frequently used sanitary products, such as in kitchen sinks, sinks, bathtubs and gardens. Generally, a water tap functions to open and close the water flow using a lever or button. However, as technology develops, water taps are not only opened and closed manually, but also use electrical systems or sensors. The way the sensor faucet works is simple, when your hand approaches the sensor faucet, the water will automatically flow and stop after a few seconds.
Sensor faucets are generally used in residential sinks and public facilities, such as hotels, restaurants and recreation areas. However, before buying a sensor faucet, you should first study and analyze the sensor faucet that suits your building's needs. Here are the tips:
Selection of the right basic materials At first glance, the external appearance of the sensor faucet will look the same as an ordinary water faucet. What is different is the basic material of the sensor faucet itself which leads to the difference in price. Choose a sensor tap made of brass so that it can be used for a long time and does not rust easily.
Pay attention to size The height of the sensor faucet certainly varies. Before buying, you should first measure the appropriate distance between the sink and the sensor faucet so that it is not too low. Because, this will make it difficult to wash your hands, and if it is too high, the reflection of the water will exceed the wall of the sink.
Multifunctional electrical system Before buying a sensor faucet, you need to ensure whether the area around the sink where the sensor faucet will be used has a socket. It is important to choose the right electrical system for the sensor tap. Choose a sensor faucet that uses a multifunctional electrical system so that when the power goes out you can still use batteries as the right solution.
Design suitability It's best to choose a sensor faucet that suits your sink style. Apart from maximum function, using a sensor faucet will add to the aesthetic value of the bathroom.
Availability of spare parts Make sure the brand of sensor faucet you choose has complete spare parts so that if damage occurs it can still be replaced and used again.
Official guarantee Choose a sensor faucet that has a guarantee so that if there are technical problems you can immediately contact customer care via customer service. Usually, guaranteed products also provide spare parts for replacement. This will make it easier and more comfortable for you.
Additional information To install the sensor tap on the sink table, you need additional tools in the form of a ½ inch two-prong tap stop, flexible measuring 40-50 cm, seal tape, and a tap stop thread. Meanwhile, in the process of installing the sensor faucet, the recommended installation distance is around 15-20 cm from the top surface of the sink with an installation pipe size of ½ inch.
