The kitchen sink or sink is a special container for storing washing water in the kitchen. Usually, this device is installed together with the kitchen table. The size is bigger than the usual sink and its position is installed lower.
In modern dwellings, a kitchen sink is a must-have tool for every kitchen. Apart from being functional, the sink also adds to the aesthetics and beauty of the kitchen. If you are interested in having your own kitchen sink in the kitchen, you can buy kitchen sink products from Germany Brilliant with guaranteed quality.
Installation is also quite easy. Don't believe it? Here are the steps in installing a kitchen sink on the kitchen table that you can try.
Check the condition of the kitchen table first. Make sure the available hole size matches the size of the kitchen sink that has been purchased. Because if it is not suitable, it will form a gap that has the potential to cause leakage.
Use an adhesive material in the form of cement dough to connect the kitchen sink to the kitchen table. This dough is made from a mixture of cement and sand in a ratio of 1: 2. But you can also use other adhesive materials according to the type of kitchen sink chosen.
Pour enough cement mixture into the installation hole on the kitchen table. Install the kitchen sink in the hole. Then give the cement mixture around the kitchen sink and table connections.
Check the results of the kitchen sink installation. Are the edges still gapped or not? The gaps that are not detected will have the potential to make water from the kitchen sink seep out.
If you find a gap between the installation of the kitchen sink, immediately patch it again using cement dough. Wait a few moments for this patch to dry, then coat it with a sealant.
Sealant functions to prevent seepage due to water flowing through the pores of the kitchen table. This material will hold water seepage. Apply a generous amount of sealant to the entire surface of the joint, then spread it evenly.
After the kitchen sink is installed, pay attention to the installation of pipes and taps. Pay attention to the details required by the series of water flow starting from quasi-drat, tee fittings and pipe joints, all of which must be calculated with precision, precision and accuracy by the experts.
Leave it for 3 x 24 hours before the kitchen sink is ready to use. Wait for the cement mixture and sealant to dry completely first. If you use it too quickly, the cement that hasn't dried completely will break down quickly as a result of continuous exposure to water.
Installation of a kitchen sink must be done carefully and thoroughly. Installation that is carried out carelessly will have an impact on the kitchen sink function that is less than optimal. Don't forget to clean the kitchen sink regularly and remove the dirt clogging the afur so it doesn't get clogged when used.
